Reboot Medium Cut Nano Compound


Reboot Medium Cut Nano Compound

from 39.99

Reboot is engineered with powerful synthetic cleaning agents and cutting edge abrasive technology to give your investment next-level restoration. This premium grade high gloss polishing compound is ideal for gel coat and marine paint applications. Can be used in 1-step situations. Just enough abrasive to cut and finish down to nearly a swirl-free finish.

Add To Cart

Product Attributes:

  • Marine-grade buffing compound specially designed for boats and yachts

  • Removes dry sanding scratches of 1000 to 1200 grit, plus finer wet sanding scratches

  • Does not contain waxes, fillers or silicone

  • Long product cycle

  • Minimal residue removal 

At Marine Nano Shop, we always put your satisfaction first. Come to us with any questions, comments or concerns you have about our products, and our support staff will be happy to make sure you get the most from your purchase.

If you want to restore your vessel to that professional, factory look, this precise compounding agent is a one-step solution that can protect as well as polish.

Reboot is part of a comprehensive portfolio of marine-grade restoration products. For best restoration results, we recommend following up your Reboot application with Ignite or Fusion as a final phase for that glossy, professional-level finish.

 We recommend using Reboot with the following pad types:

  • single-sided wool grip pad

  • double-sided wool pad


  1. Shake well before using. Do not apply in sunlight or on warm surfaces.

  2. Apply a 2” dab of Gel Coat Compound for a 2’ x 2’ section and spread with the cutting pad.

  3. Buff at a speed between 1,800 to 2,600 rpm (recommended speed is 2,200 rpm)

  4. Work the buffer side to side slowly in a figure eight pattern as you slowly buff the gel coat surface until most of the product is gone and gloss appears.

  5. Add more compound and repeat if necessary to remove deep scratches.